|
Greenhouse Covering -
Installing Polyethylene Film or Plastic sheets
|
The Greenhouse Polyethylene
material - Greenhouse covering materials
|
Plastic for greenhouse covering - What type of poly to
buy for a greenhouse - PVC Hoop house |
|
|
|
|
|
|
|
|
|
|
Greenhouse covering materials |
|
|
|
Plastic Greenhouse
How to install polyethylene |
|
|
|
Polyethylene film for
greenhouse: |
|
We
are ready for the installation of plastic (tarp) polyethylene.
Note: I suggest you to request some help from a friend to complete this step.
Purchase and Warranty: I bought my roll of polyethylene to
a Farming Hardware Center. I bought the medium quality (Thickness: 4 micrometer). 5 years warranty. |
|
|
|
|
|
|
|
|
|
Installing the polyethylene sheeting |
|
|
Greenhouse Plastic sheet Installation
Greenhouse plastic film |
|
Greenhouse covering
tips: |
|
Setup of
the greenhouse plastic roll before install it. |
|
|
|
|
|
|
|
Covering greenhouse with plastic |
|
|
Greenhouse covering material
How to install polyethylene
film |
|
Greenhouse plastic
cover installation: |
|
Unroll the polyethylene
film gently to avoid tearing.
Tip: install at a time when there is no wind.
On your
right,
my
artificial creek ! |
|
|
|
|
|
Attach polyethylene to a greenhouse frame |
|
|
Plastic Sheeting to Wood Greenhouse
Greenhouse Poly coverings |
|
Greenhouse poly
installation: |
|
Screw the 1" x 3" above
the polyethylene film to hold it in place.
Note: Avoid nails. |
|
|
|
|
|
Cheap polyethylene film - Fixing plastic
sheeeting to wood |
|
|
Greenhouse clear plastic film
How to install greenhouse
covering |
|
Polyethylene film: |
|
For openings must pass the
polyethylene film not on as if they did not exist.
Thereafter, go around the opening with 1" X 3" screwed and cut
with a utility knife inside. |
|
|
|
|
|
|
|
Install poly covers on garden greenhouse |
|
|
How to build cheap Greenhouse
Clear Poly film for
Greenhouse |
|
DIY greenhouse
plastic installation: |
|
To get it into the
plastic, provide a surplus in the bottom of the wall and rotate
around a 1" X 3" (like a roller. Then fix the 1" X 3" at the bottom
of the greenhouse by means of screw 3".
Note: During high winds, there is a lot of pressure on the
polyethylene film. This is why I recommend screwing down the screws
with a minimum of 3". Otherwise any tear. |
|
|
|
|
|
|
|
Plastic cover over the greenhouse wood
structure. |
|
|
|
Plastic film for greenhouse
DIY Garden Greenhouse |
|
How to install
greenhouse cover: |
|
Be careful with sharp
joints, especially the roof. They could rip your plastic sheet. A
good sanding pieces of wood helps to prevent everything.
Polyethylene is a good
material for Lean Greenhouse or attached greenhouse too.
Purchasing greenhouse? Why you can't build your own greenhouse! |
|
|
|
|
|
|